Clear coat cloudy after buffing

I already applied ScratchX polish with some improvement but its not going away. You want to hit the surface with some 1000 grit wet sanding.

I will take you through the steps required li.

Clear coat cloudy after buffing. Your probably going to have to sand it and re-clear it. What happened probably is that the base coat is reacting to the clear and is disfusing the clear witch is causing the fog look. It is as vulnerable to chipping and peeling as any common polish just that is is devoid of colour.

Top coat is applied after you are done with c Sure there is a clear coat over the. Then put a little wax or polish on your sponge. No matter how much you apply only a thin layer remains after buffing.

If you want more protection. Cloudy spots after buffing need help removing. In the photo it looks as if the hood is an entirely different color of blue as if the hood had already been repainted with a paint that did not exactly match or it once had a tinted clear coat that had been somehow removed.

Why does the clear coat on cars get cloudy. Clear coat on cars gets cloudy milky or otherwise hazy when moisture from the environment gets trapped in the clear coat during application. This can be due to rain high humidity or extreme temperatures.

Ideally you should make clear coat applications at room temperature with no humidity. I have had this happen to me when I spray in my shop. When useing a reducer that is to fast kinda tough when its 100 degrees outside and dont crack the door enough to get the overspray out it settles on the top surfaces only making it appear cloudy.

Ethier way the old buffer will do the trick. Hope this might help someone in the future. Looks like you are going to have to respray the car or just the panels that have the problem.

You might of used to fast of activator and that is why the little white spots are showing up this is called solvent pop it happpened to me before using to fast of activator in the clear. The more you buff it the more you are going to see the white spots because the compound is getting stuck in the little holes. I recently bought a 2011 Camaro 2LTRS red jewel tintcoat.

It had serious swirls and scratches. I used Meguiars Mirror Glaze Medium Cut with a Porter Cable DA. I got the swirls and scratches out but it seems to have left the clearcoat cloudy.

You will need to sand with 4-600 wet until all the blushing clear has goneyou will most likely have to do another coat of basejust the wrong weather to be spraying acrylic. The restoration of your cars shine after rubbing wax dulls its finish starts with waxing the car in a thin and even coat. Rub the wax till a fog forms on the surface.

Polish it with a soft towel till you can see a clear and shiny coat. Maintaining cleanliness is very important during this process. I prepped and polished my new pads using these exact steps - httpswwweshinecablogsarticles71113157-buffing-pad-prep-and-care.

Then I did 2 passes each pass being overlapping horizontal and vertical lines of the heavy compound and 2-3 passes of the polish until the product was clear. Wiped clean and washed afterwards. New paint can be sanded a mere number of hours after being sprayed.

We just want to get a feel for if it was sanded at all and buffed after or if it was left to dry and now you are ready to polish it. Depending on what kind of results you are aiming to achieve you may or may not need to sand it. Cloudy finishes appear for several reasons including using an old product or one thats been stored in a very cold or hot environment.

Proper application also requires stirring the polyurethane coating immediately before placing it on the surface which should be clean and oil-free. In this video I will be showing you how to properly fix old hazy scratched and damaged clear coat on your car. I will take you through the steps required li.

To fix damaged clear coat youll need to clean the area sand the old coat away and spray on the new coat and polish. Start by washing the area with soapy water. When its clean mark out the section with masking tape.

Then sand the area with a fine-grit scratch pad to get rid of the old coat. Just clear coated my cars headlights after sanding them to clarity. I used wet sanding cleaned it with rubbing alcohol dry then sprayed but cloudy is an understatement.

Hoping this clears up by the am but their was some humidity in the air and I am bummed now thinking I will have to sand off that spray job. Clear coat turned whitemilky. Hello All I was a member on the forum previously but for some reason my login didnt work.

I had to recreate my account. Anyhow I have a problem. I created a lily flower and decided to clear coat it with Krylon Clear Spray.

I have cleared several of my projects in the past and havent. You want to hit the surface with some 1000 grit wet sanding. This will give the surface a little roughness something for the new clear coat to adhere to.

While youre at it takeout the major scratches youre talking about. Then youll want to completely clean the surface prepping it as you normally would before you spray. Then spray your clear coat.

Clear coats are a thin protective coating over a color coat also called a basecoat that are easily dulled andor scratched. Once this clear layer of paint is dulled andor scratched it requires the right products process and technique as well as the human elements of care and a passion to restore a clear defect-free high gloss finish. BuffingPolishing Gelcoat - Cloudy Comes Back I am going to try scrubbing it this weekend and maybe some acetone then back to the compound if needed.

Thanks for the links. I will use the instructions there if I have to go back to the compound. Unfortunately I dont have a slow buffer like he recommends.

I just got a new car this past November I found a deep scratch on my rear bumper. I wet sanded the area filled the scratch in with touch-up paint but I was left with a somewhat cloudy looking spot. I already applied ScratchX polish with some improvement but its not going away.

If the clear coat gets cloudy the buffing can look bad paint will look glossy bright in some spots dull and cloudy in others. How long does 2k clear coat dry. Approximately 24 hoursAllow 5-10 minutes between coats.

After allowing approximately 24 hours dry time It may been polished by hand or machine.