10
Aug
Liberally apply Marine Grease to the ram tips to help keep them corrosion free too. The degree of trim is controlled by use of the trimtilt switch.
The Yamaha Owners Manual suggests you perform standard maintenance on your power tilt and trim after the first 20 hours then every 100 hours or annually for the life of the motor.
Power tilt and trim fluid alternative. This thing proves its worth as an alternative for power tilt and trims fluid. Moreover this has improved performance that assures friction durability. It means that this fluid will handle the perfect friction condition very well.
Instead of quicksilver fluid you can use any thin mineral oil SAE5W or SAE10W sewing machine oil chainsaw oil etc. The system is not suitable for ATF or braking fluid because of the material used for seals. Cogito ergo sum Descartes credo CDK Jun 14 2009.
Atf is perfectly acceptable for use in your power trimtilt system. Power tilt fluid ATF substitute. I run Mercs and it says that either tranny fluid or Quicksilver after market Merc marine products is fine.
Rule of thumb is that if the fluid in the reservoir is red put in tranny fluid if clear QK PTT fluid. What is power tilt and trim fluid Instead of quicksilver fluid you can use any thin mineral oil SAE5W or SAE10W sewing machine oil chainsaw oil etc. The system is not.
MercuryQuicksilver power trim and steering fluid is what the factory fills them with. My Seloc manual says 10-30 motor oil is ok to use while my Clymer manual says Dexron atf is an ok substitute. Myself Ive been using any 5-30 motor oil I have handy for the last 12 years.
My manual 2005 Evinrude etec 7590 says two trim tilt systems single and triple pistons take two different fluids. Three piston - Power TrimTilt Fluid or GM Dexron II. Single piston - EvinrudeJohnson Naturelle hydraulic fluid.
I tried posting a picture but the system here wont take it for some reason. Formulated for high operating pressure with anti-foam additives for uniform flow and reduced air contamination in hydraulic trim tilt systems. Highly resistant to temperature changes this fluid provides proper lubrication and corrosion protection for all internal hydraulic components.
For the power tilt and trim the recommended fluid is Quicksilver power trim and steering fluid 92-90100A12. If unavailable use 10W-30 or 10W-40 motor oil. Im not aware of any white fluid you need to make sure that you dont have any leaks letting water in and turning the oil a milky white.
Dextron ATF is a good substitute for outboard tilt and trim oil especially since the tilt-trim unit is a hydraulic system. As a substitute Penzoil company has a marine tilt-and-trim hydraulic fluid that can be used for power steering and tilt-and-trim systems. Dextron ATF is a good substitute for outboard tilt and trim oil especially since the tilt-trim unit is a hydraulic system.
As a substitute Penzoil company has a marine tilt-and-trim hydraulic fluid that can be used for power steering and tilt-and-trim systems. The manual for my 81 Evinrude calls solely for OMC Power Tilt Trim Fluid and does not suggest an alternate. Due to the age of the motor I assume that some of the fluid has very slowly leaked out as the fluid in the reservoir is a few inches below the fill hole when its supposed to be at the level of the fill hole.
Any of you guys have any exp changing the tilttrim fluid. Mine is getting to where it doesnt want to trim all the way up and starts to slow down a lot. I took the only screwcap off that I could find and the motor was in the up position I added some fluid till it.
This keeps all but the very tip of the ram immersed in a bath of PTT fluid and safe from corrosion. Liberally apply Marine Grease to the ram tips to help keep them corrosion free too. The built-in tilt lock mechanism is for maintaining tilt for storage or periods of non-use only such as when mooring.
Do not trailer using only this mechanism to support the tilted outboard. The Yamaha Owners Manual suggests you perform standard maintenance on your power tilt and trim after the first 20 hours then every 100 hours or annually for the life of the motor. Its easy to do and most times just involves a good visual and a fluid level inspection.
That said there are parts of the system that I still attend to on a. Volvo Penta Marine 3851039 Power Steering Trim Fluid EACH 1999. Ships from and sold by LEADERS RPM.
OEM Volvo Penta Marine Engine Fuel Filter Water Separator 3847644. Only 14 left in stock - order soon. Ships from and sold by Austral International Marine.
The degree of trim is controlled by use of the trimtilt switch. The trim gauge which operates when the ignition is on indicates the trim position of your motor. To operate the power trim hold the trimtilt switch in the UP position to raise the bow or in the DOWN position to lower the bow of the boat.
Quicksilver power trim and steering fluid is designed to be added to any hydraulic fluid to boost performance. Add it to your steering or trim system to protect the seals and hoses and reduce oxidation and corrosion. Power trim and steering fluid also reduces foaming for more consistent performance.
Packaged in different quantities to match the. Yamalube Performance Power Trim And Tilt Fluid. This premium quality formula is non-foaming and resists heat and pressure normally found in power steering and power trim and tilt systems.
Checking your outboard power trim fluid is an important maintenance step to keeping your engine in peak condition. Follow the simple steps in the video. For use in most power trim and power steering systems on Mercury Mariner Force Outboards and Mercruiser sterndrives There is no need to drain the system before using this fluid - it will readily mix with the fluid in the system Not recommended for use in systems that specify SAE 0W-30 oil.
Yamaha ACC-PWRTR-MF-32 Power TrimTILT FLUI. Sold by Aleksandra Co. And ships from Amazon Fulfillment.
FREE Shipping on orders over 2500. Marine Tech Tools Outboard TrimTilt Pin Wrench AMT0006-32mm x 4mm with S-4 pins - Trim caps fit All SHOWA Manufactured TrimTilt Units on Yamaha Honda.